Friday, April 13, 2012
Ways to Keep Your PC cool
Your PC contains a lot of parts, almost all of which create heat when your computer is on. Some parts, like the CPU and graphics card , can get so hot you could cook on them.
In a properly configured computer, much of this heat is moved out of the computer's case by several fans. If your computer isn't removing the hot air fast enough, the temperature can get so hot that you risk serious damage to your PC. Needless to say, keeping your PC cool should be a top priority.
Below are the top eleven PC cooling solutions. Many are free or very inexpensive so there's really no excuse to let your computer overheat.
Allow for Air Flow
The easiest thing you can do to help keep your PC cool is to give ita little breathing room by removing any obstacles to air flow.
Make sure there's nothing sitting right against any side of the computer, especially the back. Most of the hot air flows out of the back end of the computer case. There should be at least 2 to3 inches open on either side and the back should be completely open and unobstructed.
If your computer is hidden away inside a desk, make sure the doorisn't closed all the time. Cool air enters from the front and sometimes from the sides of the case. If the door is closed all day, hot air tends to recycle inside the desk, getting hotter and hotter the longer the computer is running.
Run Your PC With the Case Closed
An "urban legend" about PC cooling is that running your computer with the case open will keep it cooler. It does seem logical- if the case is open, there would be more air flow which would help keep the computer cooler.
The missing puzzle piece here is dirt. When the case is left open, dust and debris clog the cooling fans faster than when the case is closed. This causes the fans to slow down and fail much quicker than usual. A clogged up fan doesa terrible job at cooling your expensive computer components.
It's true that running your computer with the case open might provide a small benefit at first, but the increase in fan exposure to debris has a much greater impact on temperature.
Clean Your Computer
The fans inside your computer are there to keep it cool. Do you know what slows a fan down andthen eventually makes it stop? Dirt- in the form of dust, pet hair, etc. It all finds a way into your computer and much of it gets stuck in the several fans.
One of the most effective ways to cool your PC is to clean the internal fans. There's a fan on top the CPU, one inside the power supply , and usually one or more on the front and/or back of the case.
Just shut your computer off, open up the case , and use canned air to remove the dirt from each fan. If your PC is really dirty, take it outside to clean or all that dirt willjust settle elsewhere in the room, eventually ending up back inside your PC!
Move Your Computer
Is the area you're running your computer in just too hot or too dirty? Sometimes your only optionis to move the computer. A cooler and cleaner area of the same room might be fine, but you may have to consider moving the computer somewhere else entirely.
If moving your PC just isn't an option, keep reading for more tips.
Important: Moving your computer can cause damage to the sensitive parts inside if you're not careful. Be sure to unplug everything, don't carry too much at once, and sit things down very carefully. Your main concern will be your computer's case which holds all the important parts like your hard drive , motherboard , CPU, etc.
Upgrade the CPU Fan
Your CPU is probably the most sensitive and expensive part inside your computer. It also has the most potential to overheat.
Unless you've replaced your CPU fan already, the one that's in your computer now is probably a bottom-of-the-line fan that cools your processor just enough to keep it working properly, and that's assuming it's running at fullspeed.
Many companies sell large CPU fans that help keep CPU temperature lower than a factory installed fan ever could.
Install a Case Fan (or Two)
A case fan is just a small fan that attaches to either the front or the back of a computer case, from theinside. Case fans help move air through a computer.
Installing two case fans, one to move cool air into the PC and another to move warm air out of the PC, is a great way to keep a computer cool.
Case fans are even easier to installthan CPU fans so don't be afraid to get inside your computer to tackle this project.
Stop Overclocking
If you're not sure what overclocking is, you're probably not doing it so you don't have to worry about it.
To the rest of you, you're well aware that overclocking pushes your computer's capabilities to itslimits. What you may not realize is that these changes have a direct effect on the temperature that your CPU and any other overclocked components operate at.
If you're overclocking your PC's hardware but haven't taken otherprecautions to keep that hardware cool, I definitely recommend reconfiguring your hardware to factory default settings.
Saturday, April 7, 2012
A Web Standards Checklist, How to make a proper website
A web standards checklist
The term web standards can mean different things to different people. For some, it is 'table-free sites', for others it is 'using valid code'. However, web standards are much broader than that. A site built to web standards should adhere to standards (HTML, XHTML, XML, CSS, XSLT, DOM, MathML, SVG etc) and pursue best practices (valid code, accessible code, semantically correct code, user-friendly URLs etc).
In other words, a site built to web standards should ideally be lean, clean, CSS-based, accessible, usable and search engine friendly.
About the checklist
This is not an uber-checklist. There are probably many items that could be added. More importantly, it should not be seen as a list of items that must be addressed on every site that you develop. It is simply a guide that can be used:
* to show the breadth of web standards
* as a handy tool for developers during the production phase of websites
* as an aid for developers who are interested in moving towards web standards
The checklist
1.Quality of code
1. Does the site use a correct Doctype?
2. Does the site use a Character set?
3. Does the site use Valid (X)HTML?
4. Does the site use Valid CSS?
5. Does the site use any CSS hacks?
6. Does the site use unnecessary classes or ids?
7. Is the code well structured?
8. Does the site have any broken links?
9. How does the site perform in terms of speed/page size?
10. Does the site have JavaScript errors?
2. Degree of separation between content and presentation
1. Does the site use CSS for all presentation aspects (fonts, colour, padding, borders etc)?
2. Are all decorative images in the CSS, or do they appear in the (X)HTML?
3. Accessibility for users
1. Are "alt" attributes used for all descriptive images?
2. Does the site use relative units rather than absolute units for text size?
3. Do any aspects of the layout break if font size is increased?
4. Does the site use visible skip menus?
5. Does the site use accessible forms?
6. Does the site use accessible tables?
7. Is there sufficient colour brightness/contrasts?
8. Is colour alone used for critical information?
9. Is there delayed responsiveness for dropdown menus (for users with reduced motor skills)?
10. Are all links descriptive (for blind users)?
4. Accessibility for devices
1. Does the site work acceptably across modern and older browsers?
2. Is the content accessible with CSS switched off or not supported?
3. Is the content accessible with images switched off or not supported?
4. Does the site work in text browsers such as Lynx?
5. Does the site work well when printed?
6. Does the site work well in Hand Held devices?
7. Does the site include detailed metadata?
8. Does the site work well in a range of browser window sizes?
5. Basic Usability
1. Is there a clear visual hierarchy?
2. Are heading levels easy to distinguish?
3. Does the site have easy to understand navigation?
4. Does the site use consistent navigation?
5. Are links underlined?
6. Does the site use consistent and appropriate language?
7. Do you have a sitemap page and contact page? Are they easy to find?
8. For large sites, is there a search tool?
9. Is there a link to the home page on every page in the site?
10. Are visited links clearly defined with a unique colour?
6. Site management
1. Does the site have a meaningful and helpful 404 error page that works from any depth in the site?
2. Does the site use friendly URLs?
3. Do your URLs work without "www"?
4. Does the site have a favicon?
1. Quality of code
1.1 Does the site use a correct Doctype?
A doctype (short for 'document type declaration') informs the validator which version of (X)HTML you're using, and must appear at the very top of every web page. Doctypes are a key component of compliant web pages: your markup and CSS won't validate without them.
CODE
http://www.alistapart.com/articles/doctype/
More:
CODE
http://www.w3.org/QA/2002/04/valid-dtd-list.html
CODE
http://css.maxdesign.com.au/listamatic/about-boxmodel.htm
CODE
http://gutfeldt.ch/matthias/articles/doctypeswitch.html
1.2 Does the site use a Character set?
If a user agent (eg. a browser) is unable to detect the character encoding used in a Web document, the user may be presented with unreadable text. This information is particularly important for those maintaining and extending a multilingual site, but declaring the character encoding of the document is important for anyone producing XHTML/HTML or CSS.
CODE
http://www.w3.org/International/tutorials/tutorial-char-enc/
More:
CODE
http://www.w3.org/International/O-charset.html
1.3 Does the site use Valid (X)HTML?
Valid code will render faster than code with errors. Valid code will render better than invalid code. Browsers are becoming more standards compliant, and it is becoming increasingly necessary to write valid and standards compliant HTML.
CODE
http://www.maxdesign.com.au/presentation/sit2003/06.htm
More:
CODE
http://validator.w3.org/
1.4 Does the site use Valid CSS?
You need to make sure that there aren't any errors in either your HTML or your CSS, since mistakes in either place can result in botched document appearance.
CODE
http://www.meyerweb.com/eric/articles/webrev/199904.html
More:
CODE
http://jigsaw.w3.org/css-validator/
1.5 Does the site use any CSS hacks?
Basically, hacks come down to personal choice, the amount of knowledge you have of workarounds, the specific design you are trying to achieve.
CODE
http://www.mail-archive.com/wsg@webstandardsgroup.org/msg05823.html
More:
CODE
http://css-discuss.incutio.com/?page=CssHack
CODE
http://css-discuss.incutio.com/?page=ToHackOrNotToHack
CODE
http://centricle.com/ref/css/filters/
1.6 Does the site use unnecessary classes or ids?
I've noticed that developers learning new skills often end up with good CSS but poor XHTML. Specifically, the HTML code tends to be full of unnecessary divs and ids. This results in fairly meaningless HTML and bloated style sheets.
CODE
http://www.clagnut.com/blog/228/
1.7 Is the code well structured?
Semantically correct markup uses html elements for their given purpose. Well structured HTML has semantic meaning for a wide range of user agents (browsers without style sheets, text browsers, PDAs, search engines etc.)
CODE
http://www.maxdesign.com.au/presentation/benefits/index04.htm
More:
CODE
http://www.w3.org/2003/12/semantic-extractor.html
1.8 Does the site have any broken links?
Broken links can frustrate users and potentially drive customers away. Broken links can also keep search engines from properly indexing your site.
More:
CODE
http://validator.w3.org/checklink
1.9 How does the site perform in terms of speed/page size?
Don't make me wait... That's the message users give us in survey after survey. Even broadband users can suffer the slow-loading blues.
CODE
http://www.websiteoptimization.com/speed/
1.10 Does the site have JavaScript errors?
Internet Explore for Windows allows you to turn on a debugger that will pop up a new window and let you know there are javascript errors on your site. This is available under 'Internet Options' on the Advanced tab. Uncheck 'Disable script debugging'.
2. Degree of separation between content and presentation
2.1 Does the site use CSS for all presentation aspects (fonts, colour, padding, borders etc)?
Use style sheets to control layout and presentation.
CODE
http://www.w3.org/TR/WCAG10/wai-pageauth.html#tech-style-sheets
2.2 Are all decorative images in the CSS, or do they appear in the (X)HTML?
The aim for web developers is to remove all presentation from the html code, leaving it clean and semantically correct.
CODE
http://www.maxdesign.com.au/presentation/benefits/index07.htm
3. Accessibility for users
3.1 Are "alt" attributes used for all descriptive images?
Provide a text equivalent for every non-text element
CODE
http://www.w3.org/TR/WCAG10/wai-pageauth.html#tech-text-equivalent
3.2 Does the site use relative units rather than absolute units for text size?
Use relative rather than absolute units in markup language attribute values and style sheet property values'.
CODE
http://www.w3.org/TR/WCAG10/wai-pageauth.html#tech-relative-units
More:
CODE
http://www.w3.org/TR/WCAG10/wai-pageauth.html#tech-relative-units
CODE
http://www.clagnut.com/blog/348/
3.3 Do any aspects of the layout break if font size is increased?
Try this simple test. Look at your website in a browser that supports easy incrementation of font size. Now increase your browser's font size. And again. And again... Look at your site. Does the page layout still hold together? It is dangerous for developers to assume that everyone browses using default font sizes.
3.4 Does the site use visible skip menus?
A method shall be provided that permits users to skip repetitive navigation links.
CODE
http://www.section508.gov/index.cfm?FuseAction=Content&ID=12
Group related links, identify the group (for user agents), and, until user agents do so, provide a way to bypass the group.
CODE
http://www.w3.org/TR/WCAG10-TECHS/#tech-group-links
...blind visitors are not the only ones inconvenienced by too many links in a navigation area. Recall that a mobility-impaired person with poor adaptive technology might be stuck tabbing through that morass.
CODE
http://joeclark.org/book/sashay/serialization/Chapter08.html#h4-2020
More:
CODE
http://www.niehs.nih.gov/websmith/508/o.htm
3.5 Does the site use accessible forms?
Forms aren't the easiest of things to use for people with disabilities. Navigating around a page with written content is one thing, hopping between form fields and inputting information is another.
CODE
http://www.htmldog.com/guides/htmladvanced/forms/
More:
CODE
http://www.webstandards.org/learn/tutorials/accessible-forms/01-accessible-forms.html
CODE
http://www.accessify.com/tools-and-wizards/accessible-form-builder.asp
CODE
http://accessify.com/tutorials/better-accessible-forms.asp
3.6 Does the site use accessible tables?
For data tables, identify row and column headers... For data tables that have two or more logical levels of row or column headers, use markup to associate data cells and header cells.
CODE
http://www.w3.org/TR/WCAG10/wai-pageauth.html#tech-table-headers
More:
CODE
http://www.bcc.ctc.edu/webpublishing/ada/resources/tables.asp
CODE
http://www.accessify.com/tools-and-wizards/accessible-table-builder_step1.asp
CODE
http://www.webaim.org/techniques/tables/
3.7 Is there sufficient colour brightness/contrasts?
Ensure that foreground and background colour combinations provide sufficient contrast when viewed by someone having colour deficits.
CODE
http://www.w3.org/TR/WCAG10/wai-pageauth.html#tech-colour-contrast
More:
CODE
http://www.juicystudio.com/services/colourcontrast.asp
3.8 Is colour alone used for critical information?
Ensure that all information conveyed with colour is also available without colour, for example from context or markup.
CODE
http://www.w3.org/TR/WCAG10/wai-pageauth.html#tech-colour-convey
There are basically three types of colour deficiency; Deuteranope (a form of red/green colour deficit), Protanope (another form of red/green colour deficit) and Tritanope (a blue/yellow deficit- very rare).
More:
CODE
http://colourfilter.wickline.org/
CODE
http://www.toledo-bend.com/colourblind/Ishihara.html
CODE
http://www.vischeck.com/vischeck/vischeckURL.php
3.9 Is there delayed responsiveness for dropdown menus?
Users with reduced motor skills may find dropdown menus hard to use if responsiveness is set too fast.
3.10 Are all links descriptive?
Link text should be meaningful enough to make sense when read out of context - either on its own or as part of a sequence of links. Link text should also be terse.
CODE
http://www.w3.org/TR/WCAG10/wai-pageauth.html#tech-meaningful-links
4. Accessibility for devices.
4.1 Does the site work acceptably across modern and older browsers?
Before starting to build a CSS-based layout, you should decide which browsers to support and to what level you intend to support them.
CODE
http://www.maxdesign.com.au/presentation/process/index_step01.cfm
4.2 Is the content accessible with CSS switched off or not supported?
Some people may visit your site with either a browser that does not support CSS or a browser with CSS switched off. In content is structured well, this will not be an issue.
4.3 Is the content accessible with images switched off or not supported?
Some people browse websites with images switched off - especially people on very slow connections. Content should still be accessible for these people.
4.4 Does the site work in text browsers such as Lynx?
This is like a combination of images and CSS switched off. A text-based browser will rely on well structured content to provide meaning.
More:
CODE
http://www.delorie.com/web/lynxview
4.5 Does the site work well when printed?
You can take any (X)HTML document and simply style it for print, without having to touch the markup.
CODE
http://www.alistapart.com/articles/goingtoprint/
More:
CODE
http://www.d.umn.edu/itss/support/Training/Online/webdesign/css.html#print
4.6 Does the site work well in Hand Held devices?
This is a hard one to deal with until hand held devices consistently support their correct media type. However, some layouts work better in current hand-held devices. The importance of supporting hand held devices will depend on target audiences.
4.7 Does the site include detailed metadata?
Metadata is machine understandable information for the web
CODE
http://www.w3.org/Metadata/
Metadata is structured information that is created specifically to describe another resource. In other words, metadata is 'data about data'.
4.8 Does the site work well in a range of browser window sizes?
It is a common assumption amongst developers that average screen sizes are increasing. Some developers assume that the average screen size is now 1024px wide. But what about users with smaller screens and users with hand held devices? Are they part of your target audience and are they being disadvantaged?
5. Basic Usability
5.1 Is there a clear visual hierarchy?
Organise and prioritise the contents of a page by using size, prominence and content relationships.
CODE
http://www.great-web-design-tips.com/web-site-design/165.html
5.2 Are heading levels easy to distinguish?
Use header elements to convey document structure and use them according to specification.
CODE
http://www.w3.org/TR/WCAG10/wai-pageauth.html#tech-logical-headings
5.3 Is the site's navigation easy to understand?
Your navigation system should give your visitor a clue as to what page of the site they are currently on and where they can go next.
CODE
http://www.1stsitefree.com/design_nav.htm
5.4 Is the site's navigation consistent?
If each page on your site has a consistent style of presentation, visitors will find it easier to navigate between pages and find information
CODE
http://www.juicystudio.com/tutorial/accessibility/navigation.asp
5.5 Does the site use consistent and appropriate language?
The use of clear and simple language promotes effective communication. Trying to come across as articulate can be as difficult to read as poorly written grammar, especially if the language used isn't the visitor's primary language.
CODE
http://www.juicystudio.com/tutorial/accessibility/clear.asp
5.6 Does the site have a sitemap page and contact page? Are they easy to find?
Most site maps fail to convey multiple levels of the site's information architecture. In usability tests, users often overlook site maps or can't find them. Complexity is also a problem: a map should be a map, not a navigational challenge of its own.
CODE
http://www.useit.com/alertbox/20020106.html
5.7 For large sites, is there a search tool?
While search tools are not needed on smaller sites, and some people will not ever use them, site-specific search tools allow users a choice of navigation options.
5.8 Is there a link to the home page on every page in the site?
Some users like to go back to a site's home page after navigating to content within a site. The home page becomes a base camp for these users, allowing them to regroup before exploring new content.
5.9 Are links underlined?
To maximise the perceived affordance of clickability, colour and underline the link text. Users shouldn't have to guess or scrub the page to find out where they can click.
CODE
http://www.useit.com/alertbox/20040510.html
5.10 Are visited links clearly defined?
Most important, knowing which pages they've already visited frees users from unintentionally revisiting the same pages over and over again.
CODE
http://www.useit.com/alertbox/20040503.html
6. Site management
6.1 Does the site have a meaningful and helpful 404 error page that works from any depth in the site?
You've requested a page - either by typing a URL directly into the address bar or clicking on an out-of-date link and you've found yourself in the middle of cyberspace nowhere. A user-friendly website will give you a helping hand while many others will simply do nothing, relying on the browser's built-in ability to explain what the problem is.
CODE
http://www.alistapart.com/articles/perfect404/
6.2 Does the site use friendly URLs?
Most search engines (with a few exceptions - namely Google) will not index any pages that have a question mark or other character (like an ampersand or equals sign) in the URL... what good is a site if no one can find it?
CODE
http://www.sitepoint.com/article/search-engine-friendly-urls
One of the worst elements of the web from a user interface standpoint is the URL. However, if they're short, logical, and self-correcting, URLs can be acceptably usable
CODE
http://www.merges.net/theory/20010305.html
More:
CODE
http://www.sitepoint.com/article/search-engine-friendly-urls
CODE
http://www.websitegoodies.com/article/32
CODE
http://www.merges.net/theory/20010305.html
6.3 Does the site's URL work without "www"?
While this is not critical, and in some cases is not even possible, it is always good to give people the choice of both options. If a user types your domain name without the www and gets no site, this could disadvantage both the user and you.
6.4 Does the site have a favicon?
A Favicon is a multi-resolution image included on nearly all professionally developed sites. The Favicon allows the webmaster to further promote their site, and to create a more customized appearance within a visitor's browser.
CODE
http://www.favicon.com/
Favicons are definitely not critical. However, if they are not present, they can cause 404 errors in your logs (site statistics). Browsers like IE will request them from the server when a site is bookmarked. If a favicon isn't available, a 404 error may be generated. Therefore, having a favicon could cut down on favicon specific 404 errors. The same is true of a 'robots.txt' file.
The term web standards can mean different things to different people. For some, it is 'table-free sites', for others it is 'using valid code'. However, web standards are much broader than that. A site built to web standards should adhere to standards (HTML, XHTML, XML, CSS, XSLT, DOM, MathML, SVG etc) and pursue best practices (valid code, accessible code, semantically correct code, user-friendly URLs etc).
In other words, a site built to web standards should ideally be lean, clean, CSS-based, accessible, usable and search engine friendly.
About the checklist
This is not an uber-checklist. There are probably many items that could be added. More importantly, it should not be seen as a list of items that must be addressed on every site that you develop. It is simply a guide that can be used:
* to show the breadth of web standards
* as a handy tool for developers during the production phase of websites
* as an aid for developers who are interested in moving towards web standards
The checklist
1.Quality of code
1. Does the site use a correct Doctype?
2. Does the site use a Character set?
3. Does the site use Valid (X)HTML?
4. Does the site use Valid CSS?
5. Does the site use any CSS hacks?
6. Does the site use unnecessary classes or ids?
7. Is the code well structured?
8. Does the site have any broken links?
9. How does the site perform in terms of speed/page size?
10. Does the site have JavaScript errors?
2. Degree of separation between content and presentation
1. Does the site use CSS for all presentation aspects (fonts, colour, padding, borders etc)?
2. Are all decorative images in the CSS, or do they appear in the (X)HTML?
3. Accessibility for users
1. Are "alt" attributes used for all descriptive images?
2. Does the site use relative units rather than absolute units for text size?
3. Do any aspects of the layout break if font size is increased?
4. Does the site use visible skip menus?
5. Does the site use accessible forms?
6. Does the site use accessible tables?
7. Is there sufficient colour brightness/contrasts?
8. Is colour alone used for critical information?
9. Is there delayed responsiveness for dropdown menus (for users with reduced motor skills)?
10. Are all links descriptive (for blind users)?
4. Accessibility for devices
1. Does the site work acceptably across modern and older browsers?
2. Is the content accessible with CSS switched off or not supported?
3. Is the content accessible with images switched off or not supported?
4. Does the site work in text browsers such as Lynx?
5. Does the site work well when printed?
6. Does the site work well in Hand Held devices?
7. Does the site include detailed metadata?
8. Does the site work well in a range of browser window sizes?
5. Basic Usability
1. Is there a clear visual hierarchy?
2. Are heading levels easy to distinguish?
3. Does the site have easy to understand navigation?
4. Does the site use consistent navigation?
5. Are links underlined?
6. Does the site use consistent and appropriate language?
7. Do you have a sitemap page and contact page? Are they easy to find?
8. For large sites, is there a search tool?
9. Is there a link to the home page on every page in the site?
10. Are visited links clearly defined with a unique colour?
6. Site management
1. Does the site have a meaningful and helpful 404 error page that works from any depth in the site?
2. Does the site use friendly URLs?
3. Do your URLs work without "www"?
4. Does the site have a favicon?
1. Quality of code
1.1 Does the site use a correct Doctype?
A doctype (short for 'document type declaration') informs the validator which version of (X)HTML you're using, and must appear at the very top of every web page. Doctypes are a key component of compliant web pages: your markup and CSS won't validate without them.
CODE
http://www.alistapart.com/articles/doctype/
More:
CODE
http://www.w3.org/QA/2002/04/valid-dtd-list.html
CODE
http://css.maxdesign.com.au/listamatic/about-boxmodel.htm
CODE
http://gutfeldt.ch/matthias/articles/doctypeswitch.html
1.2 Does the site use a Character set?
If a user agent (eg. a browser) is unable to detect the character encoding used in a Web document, the user may be presented with unreadable text. This information is particularly important for those maintaining and extending a multilingual site, but declaring the character encoding of the document is important for anyone producing XHTML/HTML or CSS.
CODE
http://www.w3.org/International/tutorials/tutorial-char-enc/
More:
CODE
http://www.w3.org/International/O-charset.html
1.3 Does the site use Valid (X)HTML?
Valid code will render faster than code with errors. Valid code will render better than invalid code. Browsers are becoming more standards compliant, and it is becoming increasingly necessary to write valid and standards compliant HTML.
CODE
http://www.maxdesign.com.au/presentation/sit2003/06.htm
More:
CODE
http://validator.w3.org/
1.4 Does the site use Valid CSS?
You need to make sure that there aren't any errors in either your HTML or your CSS, since mistakes in either place can result in botched document appearance.
CODE
http://www.meyerweb.com/eric/articles/webrev/199904.html
More:
CODE
http://jigsaw.w3.org/css-validator/
1.5 Does the site use any CSS hacks?
Basically, hacks come down to personal choice, the amount of knowledge you have of workarounds, the specific design you are trying to achieve.
CODE
http://www.mail-archive.com/wsg@webstandardsgroup.org/msg05823.html
More:
CODE
http://css-discuss.incutio.com/?page=CssHack
CODE
http://css-discuss.incutio.com/?page=ToHackOrNotToHack
CODE
http://centricle.com/ref/css/filters/
1.6 Does the site use unnecessary classes or ids?
I've noticed that developers learning new skills often end up with good CSS but poor XHTML. Specifically, the HTML code tends to be full of unnecessary divs and ids. This results in fairly meaningless HTML and bloated style sheets.
CODE
http://www.clagnut.com/blog/228/
1.7 Is the code well structured?
Semantically correct markup uses html elements for their given purpose. Well structured HTML has semantic meaning for a wide range of user agents (browsers without style sheets, text browsers, PDAs, search engines etc.)
CODE
http://www.maxdesign.com.au/presentation/benefits/index04.htm
More:
CODE
http://www.w3.org/2003/12/semantic-extractor.html
1.8 Does the site have any broken links?
Broken links can frustrate users and potentially drive customers away. Broken links can also keep search engines from properly indexing your site.
More:
CODE
http://validator.w3.org/checklink
1.9 How does the site perform in terms of speed/page size?
Don't make me wait... That's the message users give us in survey after survey. Even broadband users can suffer the slow-loading blues.
CODE
http://www.websiteoptimization.com/speed/
1.10 Does the site have JavaScript errors?
Internet Explore for Windows allows you to turn on a debugger that will pop up a new window and let you know there are javascript errors on your site. This is available under 'Internet Options' on the Advanced tab. Uncheck 'Disable script debugging'.
2. Degree of separation between content and presentation
2.1 Does the site use CSS for all presentation aspects (fonts, colour, padding, borders etc)?
Use style sheets to control layout and presentation.
CODE
http://www.w3.org/TR/WCAG10/wai-pageauth.html#tech-style-sheets
2.2 Are all decorative images in the CSS, or do they appear in the (X)HTML?
The aim for web developers is to remove all presentation from the html code, leaving it clean and semantically correct.
CODE
http://www.maxdesign.com.au/presentation/benefits/index07.htm
3. Accessibility for users
3.1 Are "alt" attributes used for all descriptive images?
Provide a text equivalent for every non-text element
CODE
http://www.w3.org/TR/WCAG10/wai-pageauth.html#tech-text-equivalent
3.2 Does the site use relative units rather than absolute units for text size?
Use relative rather than absolute units in markup language attribute values and style sheet property values'.
CODE
http://www.w3.org/TR/WCAG10/wai-pageauth.html#tech-relative-units
More:
CODE
http://www.w3.org/TR/WCAG10/wai-pageauth.html#tech-relative-units
CODE
http://www.clagnut.com/blog/348/
3.3 Do any aspects of the layout break if font size is increased?
Try this simple test. Look at your website in a browser that supports easy incrementation of font size. Now increase your browser's font size. And again. And again... Look at your site. Does the page layout still hold together? It is dangerous for developers to assume that everyone browses using default font sizes.
3.4 Does the site use visible skip menus?
A method shall be provided that permits users to skip repetitive navigation links.
CODE
http://www.section508.gov/index.cfm?FuseAction=Content&ID=12
Group related links, identify the group (for user agents), and, until user agents do so, provide a way to bypass the group.
CODE
http://www.w3.org/TR/WCAG10-TECHS/#tech-group-links
...blind visitors are not the only ones inconvenienced by too many links in a navigation area. Recall that a mobility-impaired person with poor adaptive technology might be stuck tabbing through that morass.
CODE
http://joeclark.org/book/sashay/serialization/Chapter08.html#h4-2020
More:
CODE
http://www.niehs.nih.gov/websmith/508/o.htm
3.5 Does the site use accessible forms?
Forms aren't the easiest of things to use for people with disabilities. Navigating around a page with written content is one thing, hopping between form fields and inputting information is another.
CODE
http://www.htmldog.com/guides/htmladvanced/forms/
More:
CODE
http://www.webstandards.org/learn/tutorials/accessible-forms/01-accessible-forms.html
CODE
http://www.accessify.com/tools-and-wizards/accessible-form-builder.asp
CODE
http://accessify.com/tutorials/better-accessible-forms.asp
3.6 Does the site use accessible tables?
For data tables, identify row and column headers... For data tables that have two or more logical levels of row or column headers, use markup to associate data cells and header cells.
CODE
http://www.w3.org/TR/WCAG10/wai-pageauth.html#tech-table-headers
More:
CODE
http://www.bcc.ctc.edu/webpublishing/ada/resources/tables.asp
CODE
http://www.accessify.com/tools-and-wizards/accessible-table-builder_step1.asp
CODE
http://www.webaim.org/techniques/tables/
3.7 Is there sufficient colour brightness/contrasts?
Ensure that foreground and background colour combinations provide sufficient contrast when viewed by someone having colour deficits.
CODE
http://www.w3.org/TR/WCAG10/wai-pageauth.html#tech-colour-contrast
More:
CODE
http://www.juicystudio.com/services/colourcontrast.asp
3.8 Is colour alone used for critical information?
Ensure that all information conveyed with colour is also available without colour, for example from context or markup.
CODE
http://www.w3.org/TR/WCAG10/wai-pageauth.html#tech-colour-convey
There are basically three types of colour deficiency; Deuteranope (a form of red/green colour deficit), Protanope (another form of red/green colour deficit) and Tritanope (a blue/yellow deficit- very rare).
More:
CODE
http://colourfilter.wickline.org/
CODE
http://www.toledo-bend.com/colourblind/Ishihara.html
CODE
http://www.vischeck.com/vischeck/vischeckURL.php
3.9 Is there delayed responsiveness for dropdown menus?
Users with reduced motor skills may find dropdown menus hard to use if responsiveness is set too fast.
3.10 Are all links descriptive?
Link text should be meaningful enough to make sense when read out of context - either on its own or as part of a sequence of links. Link text should also be terse.
CODE
http://www.w3.org/TR/WCAG10/wai-pageauth.html#tech-meaningful-links
4. Accessibility for devices.
4.1 Does the site work acceptably across modern and older browsers?
Before starting to build a CSS-based layout, you should decide which browsers to support and to what level you intend to support them.
CODE
http://www.maxdesign.com.au/presentation/process/index_step01.cfm
4.2 Is the content accessible with CSS switched off or not supported?
Some people may visit your site with either a browser that does not support CSS or a browser with CSS switched off. In content is structured well, this will not be an issue.
4.3 Is the content accessible with images switched off or not supported?
Some people browse websites with images switched off - especially people on very slow connections. Content should still be accessible for these people.
4.4 Does the site work in text browsers such as Lynx?
This is like a combination of images and CSS switched off. A text-based browser will rely on well structured content to provide meaning.
More:
CODE
http://www.delorie.com/web/lynxview
4.5 Does the site work well when printed?
You can take any (X)HTML document and simply style it for print, without having to touch the markup.
CODE
http://www.alistapart.com/articles/goingtoprint/
More:
CODE
http://www.d.umn.edu/itss/support/Training/Online/webdesign/css.html#print
4.6 Does the site work well in Hand Held devices?
This is a hard one to deal with until hand held devices consistently support their correct media type. However, some layouts work better in current hand-held devices. The importance of supporting hand held devices will depend on target audiences.
4.7 Does the site include detailed metadata?
Metadata is machine understandable information for the web
CODE
http://www.w3.org/Metadata/
Metadata is structured information that is created specifically to describe another resource. In other words, metadata is 'data about data'.
4.8 Does the site work well in a range of browser window sizes?
It is a common assumption amongst developers that average screen sizes are increasing. Some developers assume that the average screen size is now 1024px wide. But what about users with smaller screens and users with hand held devices? Are they part of your target audience and are they being disadvantaged?
5. Basic Usability
5.1 Is there a clear visual hierarchy?
Organise and prioritise the contents of a page by using size, prominence and content relationships.
CODE
http://www.great-web-design-tips.com/web-site-design/165.html
5.2 Are heading levels easy to distinguish?
Use header elements to convey document structure and use them according to specification.
CODE
http://www.w3.org/TR/WCAG10/wai-pageauth.html#tech-logical-headings
5.3 Is the site's navigation easy to understand?
Your navigation system should give your visitor a clue as to what page of the site they are currently on and where they can go next.
CODE
http://www.1stsitefree.com/design_nav.htm
5.4 Is the site's navigation consistent?
If each page on your site has a consistent style of presentation, visitors will find it easier to navigate between pages and find information
CODE
http://www.juicystudio.com/tutorial/accessibility/navigation.asp
5.5 Does the site use consistent and appropriate language?
The use of clear and simple language promotes effective communication. Trying to come across as articulate can be as difficult to read as poorly written grammar, especially if the language used isn't the visitor's primary language.
CODE
http://www.juicystudio.com/tutorial/accessibility/clear.asp
5.6 Does the site have a sitemap page and contact page? Are they easy to find?
Most site maps fail to convey multiple levels of the site's information architecture. In usability tests, users often overlook site maps or can't find them. Complexity is also a problem: a map should be a map, not a navigational challenge of its own.
CODE
http://www.useit.com/alertbox/20020106.html
5.7 For large sites, is there a search tool?
While search tools are not needed on smaller sites, and some people will not ever use them, site-specific search tools allow users a choice of navigation options.
5.8 Is there a link to the home page on every page in the site?
Some users like to go back to a site's home page after navigating to content within a site. The home page becomes a base camp for these users, allowing them to regroup before exploring new content.
5.9 Are links underlined?
To maximise the perceived affordance of clickability, colour and underline the link text. Users shouldn't have to guess or scrub the page to find out where they can click.
CODE
http://www.useit.com/alertbox/20040510.html
5.10 Are visited links clearly defined?
Most important, knowing which pages they've already visited frees users from unintentionally revisiting the same pages over and over again.
CODE
http://www.useit.com/alertbox/20040503.html
6. Site management
6.1 Does the site have a meaningful and helpful 404 error page that works from any depth in the site?
You've requested a page - either by typing a URL directly into the address bar or clicking on an out-of-date link and you've found yourself in the middle of cyberspace nowhere. A user-friendly website will give you a helping hand while many others will simply do nothing, relying on the browser's built-in ability to explain what the problem is.
CODE
http://www.alistapart.com/articles/perfect404/
6.2 Does the site use friendly URLs?
Most search engines (with a few exceptions - namely Google) will not index any pages that have a question mark or other character (like an ampersand or equals sign) in the URL... what good is a site if no one can find it?
CODE
http://www.sitepoint.com/article/search-engine-friendly-urls
One of the worst elements of the web from a user interface standpoint is the URL. However, if they're short, logical, and self-correcting, URLs can be acceptably usable
CODE
http://www.merges.net/theory/20010305.html
More:
CODE
http://www.sitepoint.com/article/search-engine-friendly-urls
CODE
http://www.websitegoodies.com/article/32
CODE
http://www.merges.net/theory/20010305.html
6.3 Does the site's URL work without "www"?
While this is not critical, and in some cases is not even possible, it is always good to give people the choice of both options. If a user types your domain name without the www and gets no site, this could disadvantage both the user and you.
6.4 Does the site have a favicon?
A Favicon is a multi-resolution image included on nearly all professionally developed sites. The Favicon allows the webmaster to further promote their site, and to create a more customized appearance within a visitor's browser.
CODE
http://www.favicon.com/
Favicons are definitely not critical. However, if they are not present, they can cause 404 errors in your logs (site statistics). Browsers like IE will request them from the server when a site is bookmarked. If a favicon isn't available, a 404 error may be generated. Therefore, having a favicon could cut down on favicon specific 404 errors. The same is true of a 'robots.txt' file.
36 Graphics & Design Ebooks
Maya, Photoshop, Macromedia, Bryce, Digital Photography, & more....
Download with FlashGet
f*p://195.135.232.80/Books/design/8.books.Maya.[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/A.Short.Course.in.Digital.Photography.[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Adobe.Creative.Suite.Keyboard.Shortcuts.[by.KiN_www.netz.ru]_3,1.MB.rar
f*p://195.135.232.80/Books/design/Adobe.Photoshop.CS.in.10.Simple.Steps.or.Less.(2004).[by.KiN_www.netz.ru]_7,84 MB.rar
f*p://195.135.232.80/Books/design/Adobe.Photoshop.Tutorial.7.Day.Course.html.a.[28.84.MB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Advanced.3D.Photorealism.Techniques[9,76.MB_RUS_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Bill.Flemming.Advanced.3D.Photorealism.Techniques.[RUS].[by.KiN_www.netz.ru]_9,75 MB.rar
f*p://195.135.232.80/Books/design/Bryce.5.Manual.[by.KiN_www.netz.ru_4.01MB].rar
f*p://195.135.232.80/Books/design/Corel.103.tutorials.RUS.[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Designing Secure Web-Based Applications for Windows 2000.zip
f*p://195.135.232.80/Books/design/DHTML.Weekend.Crash.Course[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Digital.Photography.Hacks.[by.KiN_www.netz.ru]_11,76.MB.rar
f*p://195.135.232.80/Books/design/How.To.Do.Everything.With.Illustrator.[by.KiN_www.netz.ru]_30,58.MB.rar
f*p://195.135.232.80/Books/design/How.To.Do.Everything.With.Photoshop.7.[by.KiN_www.netz.ru]_9,8 MB.rar
f*p://195.135.232.80/Books/design/How.To.Draw.Anime.Photoshop.Coloring.Tips.[by.KiN_www.netz.ru]_773 kB.rar
f*p://195.135.232.80/Books/design/How.To.Draw.Manga.Photoshop.Techniques.[by.KiN_www.netz.ru]_343 kB.rar
f*p://195.135.232.80/Books/design/How.To.Use.Adobe.Photoshop.7.[by.KiN_www.netz.ru]_14,66 MB.rar
f*p://195.135.232.80/Books/design/HTML.4.01.Weekend.Crash.Course[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/HTML.Complete.Course.[by.KiN_www.netz.ru]_26,79.MB.rar
f*p://195.135.232.80/Books/design/Learn.How.To.Draw.[by.KiN_www.netz.ru]_1,61.MB.rar
f*p://195.135.232.80/Books/design/Learn.HTML4.In.a.Weekend.[by.KiN_www.netz.ru]_11,02.MB.rar
f*p://195.135.232.80/Books/design/Learning.Macromedia.FlashMX.2004[658.kB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Macromedia.Dreamweaver.4.Bible[8,86.MB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Macromedia.Dreamweaver.MX.2004.Web.Application.Recipes[6,5.MB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Macromedia.Flash.MX.2004.ActionScript.Reference.Guide.rar
f*p://195.135.232.80/Books/design/Macromedia.Flash.MX.2004.Using.Components.rar
f*p://195.135.232.80/Books/design/Macromedia.Flashmx.Actionscript.Reference.Guide.2004[2,66.MB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Macromedia.Flashmx.Using.Components.2004[979.kB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Macromedia.Press.Macromedia.Dreamweaver.MX.Dynamic.Applications.[10.46.MB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/New.Riders.Photoshop.7.Power.Shortcuts.[by.KiN_www.netz.ru]_3,5 MB.rar
f*p://195.135.232.80/Books/design/NewRiders.MacromediaDreamweaverMx2004WebApplicationRecipes(6,5MB_www.netz.ru).rar f*p://195.135.232.80/Books/design/PhotoShop.&.Illustrator.Tutorial.[14.37.MB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Photoshop.6.Bible.[13.95.MB_www.netz.ru].rar f*p://195.135.232.80/Books/design/Photoshop.75.tutorial.RUS.[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Photoshop.CS.Tips.and.Tricks.[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Photoshop.Rus.4-18[6.5Mb,_www.netz.ru].rar
Download with FlashGet
f*p://195.135.232.80/Books/design/8.books.Maya.[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/A.Short.Course.in.Digital.Photography.[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Adobe.Creative.Suite.Keyboard.Shortcuts.[by.KiN_www.netz.ru]_3,1.MB.rar
f*p://195.135.232.80/Books/design/Adobe.Photoshop.CS.in.10.Simple.Steps.or.Less.(2004).[by.KiN_www.netz.ru]_7,84 MB.rar
f*p://195.135.232.80/Books/design/Adobe.Photoshop.Tutorial.7.Day.Course.html.a.[28.84.MB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Advanced.3D.Photorealism.Techniques[9,76.MB_RUS_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Bill.Flemming.Advanced.3D.Photorealism.Techniques.[RUS].[by.KiN_www.netz.ru]_9,75 MB.rar
f*p://195.135.232.80/Books/design/Bryce.5.Manual.[by.KiN_www.netz.ru_4.01MB].rar
f*p://195.135.232.80/Books/design/Corel.103.tutorials.RUS.[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Designing Secure Web-Based Applications for Windows 2000.zip
f*p://195.135.232.80/Books/design/DHTML.Weekend.Crash.Course[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Digital.Photography.Hacks.[by.KiN_www.netz.ru]_11,76.MB.rar
f*p://195.135.232.80/Books/design/How.To.Do.Everything.With.Illustrator.[by.KiN_www.netz.ru]_30,58.MB.rar
f*p://195.135.232.80/Books/design/How.To.Do.Everything.With.Photoshop.7.[by.KiN_www.netz.ru]_9,8 MB.rar
f*p://195.135.232.80/Books/design/How.To.Draw.Anime.Photoshop.Coloring.Tips.[by.KiN_www.netz.ru]_773 kB.rar
f*p://195.135.232.80/Books/design/How.To.Draw.Manga.Photoshop.Techniques.[by.KiN_www.netz.ru]_343 kB.rar
f*p://195.135.232.80/Books/design/How.To.Use.Adobe.Photoshop.7.[by.KiN_www.netz.ru]_14,66 MB.rar
f*p://195.135.232.80/Books/design/HTML.4.01.Weekend.Crash.Course[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/HTML.Complete.Course.[by.KiN_www.netz.ru]_26,79.MB.rar
f*p://195.135.232.80/Books/design/Learn.How.To.Draw.[by.KiN_www.netz.ru]_1,61.MB.rar
f*p://195.135.232.80/Books/design/Learn.HTML4.In.a.Weekend.[by.KiN_www.netz.ru]_11,02.MB.rar
f*p://195.135.232.80/Books/design/Learning.Macromedia.FlashMX.2004[658.kB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Macromedia.Dreamweaver.4.Bible[8,86.MB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Macromedia.Dreamweaver.MX.2004.Web.Application.Recipes[6,5.MB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Macromedia.Flash.MX.2004.ActionScript.Reference.Guide.rar
f*p://195.135.232.80/Books/design/Macromedia.Flash.MX.2004.Using.Components.rar
f*p://195.135.232.80/Books/design/Macromedia.Flashmx.Actionscript.Reference.Guide.2004[2,66.MB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Macromedia.Flashmx.Using.Components.2004[979.kB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Macromedia.Press.Macromedia.Dreamweaver.MX.Dynamic.Applications.[10.46.MB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/New.Riders.Photoshop.7.Power.Shortcuts.[by.KiN_www.netz.ru]_3,5 MB.rar
f*p://195.135.232.80/Books/design/NewRiders.MacromediaDreamweaverMx2004WebApplicationRecipes(6,5MB_www.netz.ru).rar f*p://195.135.232.80/Books/design/PhotoShop.&.Illustrator.Tutorial.[14.37.MB_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Photoshop.6.Bible.[13.95.MB_www.netz.ru].rar f*p://195.135.232.80/Books/design/Photoshop.75.tutorial.RUS.[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Photoshop.CS.Tips.and.Tricks.[by.KiN_www.netz.ru].rar
f*p://195.135.232.80/Books/design/Photoshop.Rus.4-18[6.5Mb,_www.netz.ru].rar
23 Ways To Speed WinXP, Not only Defrag
Since defragging the disk won't do much to improve Windows XP performance, here are 23 suggestions that will. Each can enhance the performance and reliability of your customers' PCs. Best of all, most of them will cost you nothing.
1.) To decrease a system's boot time and increase system performance, use the money you save by not buying defragmentation software -- the built-in Windows defragmenter works just fine -- and instead equip the computer with an Ultra-133 or Serial ATA hard drive with 8-MB cache buffer.
2.) If a PC has less than 512 MB of RAM, add more memory. This is a relatively inexpensive and easy upgrade that can dramatically improve system performance.
3.) Ensure that Windows XP is utilizing the NTFS file system. If you're not sure, here's how to check: First, double-click the My Computer icon, right-click on the C: Drive, then select Properties. Next, examine the File System type; if it says FAT32, then back-up any important data. Next, click Start, click Run, type CMD, and then click OK. At the prompt, type CONVERT C: /FS:NTFS and press the Enter key. This process may take a while; it's important that the computer be uninterrupted and virus-free. The file system used by the bootable drive will be either FAT32 or NTFS. I highly recommend NTFS for its superior security, reliability, and efficiency with larger disk drives.
4.) Disable file indexing. The indexing service extracts information from documents and other files on the hard drive and creates a "searchable keyword index." As you can imagine, this process can be quite taxing on any system.
The idea is that the user can search for a word, phrase, or property inside a document, should they have hundreds or thousands of documents and not know the file name of the document they want. Windows XP's built-in search functionality can still perform these kinds of searches without the Indexing service. It just takes longer. The OS has to open each file at the time of the request to help find what the user is looking for.
Most people never need this feature of search. Those who do are typically in a large corporate environment where thousands of documents are located on at least one server. But if you're a typical system builder, most of your clients are small and medium businesses. And if your clients have no need for this search feature, I recommend disabling it.
Here's how: First, double-click the My Computer icon. Next, right-click on the C: Drive, then select Properties. Uncheck "Allow Indexing Service to index this disk for fast file searching." Next, apply changes to "C: subfolders and files," and click OK. If a warning or error message appears (such as "Access is denied"), click the Ignore All button.
5.) Update the PC's video and motherboard chipset drivers. Also, update and configure the BIOS. For more information on how to configure your BIOS properly, see this article on my site.
6.) Empty the Windows Prefetch folder every three months or so. Windows XP can "prefetch" portions of data and applications that are used frequently. This makes processes appear to load faster when called upon by the user. That's fine. But over time, the prefetch folder may become overloaded with references to files and applications no longer in use. When that happens, Windows XP is wasting time, and slowing system performance, by pre-loading them. Nothing critical is in this folder, and the entire contents are safe to delete.
7.) Once a month, run a disk cleanup. Here's how: Double-click the My Computer icon. Then right-click on the C: drive and select Properties. Click the Disk Cleanup button -- it's just to the right of the Capacity pie graph -- and delete all temporary files.
8.) In your Device Manager, double-click on the IDE ATA/ATAPI Controllers device, and ensure that DMA is enabled for each drive you have connected to the Primary and Secondary controller. Do this by double-clicking on Primary IDE Channel. Then click the Advanced Settings tab. Ensure the Transfer Mode is set to "DMA if available" for both Device 0 and Device 1. Then repeat this process with the Secondary IDE Channel.
9.) Upgrade the cabling. As hard-drive technology improves, the cabling requirements to achieve these performance boosts have become more stringent. Be sure to use 80-wire Ultra-133 cables on all of your IDE devices with the connectors properly assigned to the matching Master/Slave/Motherboard sockets. A single device must be at the end of the cable; connecting a single drive to the middle connector on a ribbon cable will cause signaling problems. With Ultra DMA hard drives, these signaling problems will prevent the drive from performing at its maximum potential. Also, because these cables inherently support "cable select," the location of each drive on the cable is important. For these reasons, the cable is designed so drive positioning is explicitly clear.
10.) Remove all spyware from the computer. Use free programs such as AdAware by Lavasoft or SpyBot Search & Destroy. Once these programs are installed, be sure to check for and download any updates before starting your search. Anything either program finds can be safely removed. Any free software that requires spyware to run will no longer function once the spyware portion has been removed; if your customer really wants the program even though it contains spyware, simply reinstall it. For more information on removing Spyware visit this Web Pro News page.
11.) Remove any unnecessary programs and/or items from Windows Startup routine using the MSCONFIG utility. Here's how: First, click Start, click Run, type MSCONFIG, and click OK. Click the StartUp tab, then uncheck any items you don't want to start when Windows starts. Unsure what some items are? Visit the WinTasks Process Library. It contains known system processes, applications, as well as spyware references and explanations. Or quickly identify them by searching for the filenames using Google or another Web search engine.
12.) Remove any unnecessary or unused programs from the Add/Remove Programs section of the Control Panel.
13.) Turn off any and all unnecessary animations, and disable active desktop. In fact, for optimal performance, turn off all animations. Windows XP offers many different settings in this area. Here's how to do it: First click on the System icon in the Control Panel. Next, click on the Advanced tab. Select the Settings button located under Performance. Feel free to play around with the options offered here, as nothing you can change will alter the reliability of the computer -- only its responsiveness.
14.) If your customer is an advanced user who is comfortable editing their registry, try some of the performance registry tweaks offered at Tweak XP.
15.) Visit Microsoft's Windows update site regularly, and download all updates labeled Critical. Download any optional updates at your discretion.
16.) Update the customer's anti-virus software on a weekly, even daily, basis. Make sure they have only one anti-virus software package installed. Mixing anti-virus software is a sure way to spell disaster for performance and reliability.
17.) Make sure the customer has fewer than 500 type fonts installed on their computer. The more fonts they have, the slower the system will become. While Windows XP handles fonts much more efficiently than did the previous versions of Windows, too many fonts -- that is, anything over 500 -- will noticeably tax the system.
18.) Do not partition the hard drive. Windows XP's NTFS file system runs more efficiently on one large partition. The data is no safer on a separate partition, and a reformat is never necessary to reinstall an operating system. The same excuses people offer for using partitions apply to using a folder instead. For example, instead of putting all your data on the D: drive, put it in a folder called "D drive." You'll achieve the same organizational benefits that a separate partition offers, but without the degradation in system performance. Also, your free space won't be limited by the size of the partition; instead, it will be limited by the size of the entire hard drive. This means you won't need to resize any partitions, ever. That task can be time-consuming and also can result in lost data.
19.) Check the system's RAM to ensure it is operating properly. I recommend using a free program called MemTest86. The download will make a bootable CD or diskette (your choice), which will run 10 extensive tests on the PC's memory automatically after you boot to the disk you created. Allow all tests to run until at least three passes of the 10 tests are completed. If the program encounters any errors, turn off and unplug the computer, remove a stick of memory (assuming you have more than one), and run the test again. Remember, bad memory cannot be repaired, but only replaced.
20.) If the PC has a CD or DVD recorder, check the drive manufacturer's Web site for updated firmware. In some cases you'll be able to upgrade the recorder to a faster speed. Best of all, it's free.
21.) Disable unnecessary services. Windows XP loads a lot of services that your customer most likely does not need. To determine which services you can disable for your client, visit the Black Viper site for Windows XP configurations.
22.) If you're sick of a single Windows Explorer window crashing and then taking the rest of your OS down with it, then follow this tip: open My Computer, click on Tools, then Folder Options. Now click on the View tab. Scroll down to "Launch folder windows in a separate process," and enable this option. You'll have to reboot your machine for this option to take effect.
23.) At least once a year, open the computer's cases and blow out all the dust and debris. While you're in there, check that all the fans are turning properly. Also inspect the motherboard capacitors for bulging or leaks. For more information on this leaking-capacitor phenomena, you can read numerous articles on my site.
Following any of these suggestions should result in noticeable improvements to the performance and reliability of your customers' computers. If you still want to defrag a disk, remember that the main benefit will be to make your data more retrievable in the event of a crashed drive.
1.) To decrease a system's boot time and increase system performance, use the money you save by not buying defragmentation software -- the built-in Windows defragmenter works just fine -- and instead equip the computer with an Ultra-133 or Serial ATA hard drive with 8-MB cache buffer.
2.) If a PC has less than 512 MB of RAM, add more memory. This is a relatively inexpensive and easy upgrade that can dramatically improve system performance.
3.) Ensure that Windows XP is utilizing the NTFS file system. If you're not sure, here's how to check: First, double-click the My Computer icon, right-click on the C: Drive, then select Properties. Next, examine the File System type; if it says FAT32, then back-up any important data. Next, click Start, click Run, type CMD, and then click OK. At the prompt, type CONVERT C: /FS:NTFS and press the Enter key. This process may take a while; it's important that the computer be uninterrupted and virus-free. The file system used by the bootable drive will be either FAT32 or NTFS. I highly recommend NTFS for its superior security, reliability, and efficiency with larger disk drives.
4.) Disable file indexing. The indexing service extracts information from documents and other files on the hard drive and creates a "searchable keyword index." As you can imagine, this process can be quite taxing on any system.
The idea is that the user can search for a word, phrase, or property inside a document, should they have hundreds or thousands of documents and not know the file name of the document they want. Windows XP's built-in search functionality can still perform these kinds of searches without the Indexing service. It just takes longer. The OS has to open each file at the time of the request to help find what the user is looking for.
Most people never need this feature of search. Those who do are typically in a large corporate environment where thousands of documents are located on at least one server. But if you're a typical system builder, most of your clients are small and medium businesses. And if your clients have no need for this search feature, I recommend disabling it.
Here's how: First, double-click the My Computer icon. Next, right-click on the C: Drive, then select Properties. Uncheck "Allow Indexing Service to index this disk for fast file searching." Next, apply changes to "C: subfolders and files," and click OK. If a warning or error message appears (such as "Access is denied"), click the Ignore All button.
5.) Update the PC's video and motherboard chipset drivers. Also, update and configure the BIOS. For more information on how to configure your BIOS properly, see this article on my site.
6.) Empty the Windows Prefetch folder every three months or so. Windows XP can "prefetch" portions of data and applications that are used frequently. This makes processes appear to load faster when called upon by the user. That's fine. But over time, the prefetch folder may become overloaded with references to files and applications no longer in use. When that happens, Windows XP is wasting time, and slowing system performance, by pre-loading them. Nothing critical is in this folder, and the entire contents are safe to delete.
7.) Once a month, run a disk cleanup. Here's how: Double-click the My Computer icon. Then right-click on the C: drive and select Properties. Click the Disk Cleanup button -- it's just to the right of the Capacity pie graph -- and delete all temporary files.
8.) In your Device Manager, double-click on the IDE ATA/ATAPI Controllers device, and ensure that DMA is enabled for each drive you have connected to the Primary and Secondary controller. Do this by double-clicking on Primary IDE Channel. Then click the Advanced Settings tab. Ensure the Transfer Mode is set to "DMA if available" for both Device 0 and Device 1. Then repeat this process with the Secondary IDE Channel.
9.) Upgrade the cabling. As hard-drive technology improves, the cabling requirements to achieve these performance boosts have become more stringent. Be sure to use 80-wire Ultra-133 cables on all of your IDE devices with the connectors properly assigned to the matching Master/Slave/Motherboard sockets. A single device must be at the end of the cable; connecting a single drive to the middle connector on a ribbon cable will cause signaling problems. With Ultra DMA hard drives, these signaling problems will prevent the drive from performing at its maximum potential. Also, because these cables inherently support "cable select," the location of each drive on the cable is important. For these reasons, the cable is designed so drive positioning is explicitly clear.
10.) Remove all spyware from the computer. Use free programs such as AdAware by Lavasoft or SpyBot Search & Destroy. Once these programs are installed, be sure to check for and download any updates before starting your search. Anything either program finds can be safely removed. Any free software that requires spyware to run will no longer function once the spyware portion has been removed; if your customer really wants the program even though it contains spyware, simply reinstall it. For more information on removing Spyware visit this Web Pro News page.
11.) Remove any unnecessary programs and/or items from Windows Startup routine using the MSCONFIG utility. Here's how: First, click Start, click Run, type MSCONFIG, and click OK. Click the StartUp tab, then uncheck any items you don't want to start when Windows starts. Unsure what some items are? Visit the WinTasks Process Library. It contains known system processes, applications, as well as spyware references and explanations. Or quickly identify them by searching for the filenames using Google or another Web search engine.
12.) Remove any unnecessary or unused programs from the Add/Remove Programs section of the Control Panel.
13.) Turn off any and all unnecessary animations, and disable active desktop. In fact, for optimal performance, turn off all animations. Windows XP offers many different settings in this area. Here's how to do it: First click on the System icon in the Control Panel. Next, click on the Advanced tab. Select the Settings button located under Performance. Feel free to play around with the options offered here, as nothing you can change will alter the reliability of the computer -- only its responsiveness.
14.) If your customer is an advanced user who is comfortable editing their registry, try some of the performance registry tweaks offered at Tweak XP.
15.) Visit Microsoft's Windows update site regularly, and download all updates labeled Critical. Download any optional updates at your discretion.
16.) Update the customer's anti-virus software on a weekly, even daily, basis. Make sure they have only one anti-virus software package installed. Mixing anti-virus software is a sure way to spell disaster for performance and reliability.
17.) Make sure the customer has fewer than 500 type fonts installed on their computer. The more fonts they have, the slower the system will become. While Windows XP handles fonts much more efficiently than did the previous versions of Windows, too many fonts -- that is, anything over 500 -- will noticeably tax the system.
18.) Do not partition the hard drive. Windows XP's NTFS file system runs more efficiently on one large partition. The data is no safer on a separate partition, and a reformat is never necessary to reinstall an operating system. The same excuses people offer for using partitions apply to using a folder instead. For example, instead of putting all your data on the D: drive, put it in a folder called "D drive." You'll achieve the same organizational benefits that a separate partition offers, but without the degradation in system performance. Also, your free space won't be limited by the size of the partition; instead, it will be limited by the size of the entire hard drive. This means you won't need to resize any partitions, ever. That task can be time-consuming and also can result in lost data.
19.) Check the system's RAM to ensure it is operating properly. I recommend using a free program called MemTest86. The download will make a bootable CD or diskette (your choice), which will run 10 extensive tests on the PC's memory automatically after you boot to the disk you created. Allow all tests to run until at least three passes of the 10 tests are completed. If the program encounters any errors, turn off and unplug the computer, remove a stick of memory (assuming you have more than one), and run the test again. Remember, bad memory cannot be repaired, but only replaced.
20.) If the PC has a CD or DVD recorder, check the drive manufacturer's Web site for updated firmware. In some cases you'll be able to upgrade the recorder to a faster speed. Best of all, it's free.
21.) Disable unnecessary services. Windows XP loads a lot of services that your customer most likely does not need. To determine which services you can disable for your client, visit the Black Viper site for Windows XP configurations.
22.) If you're sick of a single Windows Explorer window crashing and then taking the rest of your OS down with it, then follow this tip: open My Computer, click on Tools, then Folder Options. Now click on the View tab. Scroll down to "Launch folder windows in a separate process," and enable this option. You'll have to reboot your machine for this option to take effect.
23.) At least once a year, open the computer's cases and blow out all the dust and debris. While you're in there, check that all the fans are turning properly. Also inspect the motherboard capacitors for bulging or leaks. For more information on this leaking-capacitor phenomena, you can read numerous articles on my site.
Following any of these suggestions should result in noticeable improvements to the performance and reliability of your customers' computers. If you still want to defrag a disk, remember that the main benefit will be to make your data more retrievable in the event of a crashed drive.
16x Dvd+-rw Dl Dvd Writer Comparison Guide
Source:
CODE
http://www.extrememhz.com/dlcomp-p1.shtml
Since the introduction of double layer DVD writers, the interest has been quite overwhelming and is why we keep bringing you reviews of these highly popular drives. The anticipation has now turned into down right obsession and it has become a key component in any current or new system build, thanks to the declining prices and continued media hype. Manufacturers are quite aware of the fascination and is why they have each been releasing their own products which excel in at least one area of the testing methodology used in most reviews. This has led to some confusion as to which drive is best suited for the individuals needs. Today, we compare four 16x double layer drives and highlight both the strong and weak points in order to give you a better idea of which drive is best suited for you.
In this comparison guide, we will be looking at four of the top 16x drives to hit the market, the Pioneer DVR-108, NEC ND3500A, Lite-On SOHW-1633s and the new LG GSA-4160B. We will cover everything from design and features to performance and price. Let's begin with a quick look at each of these drives.
As far as the front bezel design goes, the LG-GSA4160B is by far the most attractive drive of the bunch. However, for those who are looking for a headphone jack, the Lite-On drive is the only DL writer offering a headphone jack, as well as volume control. The Pioneer and NEC drives, in my opinion, are the ugliest drives, with a very plain look that just wants to make you hide the drive period. Although we only obtained the 4160B in black, all these drives are offered with both white and black bezels. If you opt for the more expensive Pioneer "XL" model, it has the most impressive looks of any drive in the market. However, this will come at a very hefty price tag, considering they contain different firmware as well that offer a few extra features.
So, we have determined which is the sexiest-looking drive, but what about performance? I've done some extensive testing on each model to determine which is indeed the most impressive of the bunch. But before we show you performance results, let's briefly look at the features and what they have to offer.
Features
Each one of these drives has there disappointments when it comes to features. Let's compare each to see what they really offer.
DVD Writing
DVD+R DVD-R DVD+RW DVD-RW
LG GSA-4160B 16x 8x 4x 4x
Lite-On SOHW-1633s 16x 8x 4x 4x
NEC ND-3500A 16x 16x 4x 4x
Pioneer DVR-108 16x 16x 4x 4x
While all these drives are indeed 16x models, only two will write to both formats at this speed. The LG GSA-4160B and the Lite-On SOHW-1633s only support 8x DVD-R writing. So if you are one who only prefers this format, the NEC or Pioneer would be the best choice. All of these drives support writing to DVD re-writable media at 4x.
DVD+R9 Double Layer Writing
Write Speed
LG GSA-4160B 2.4x
Lite-On SOHW-1633s 2.4x
NEC ND-3500A 4x
Pioneer DVR-108 4x
The major disappointment with both the LG and the Lite-On 16x drives is the lack of 4x double layer writing support. Pioneer and NEC seem to be the only manufacturers to jump in and release second generation double layer drives supporting much faster 4x writing. In fact, the jump from 2.4x to 4x is quite substantial as we will show you a bit later in this comparison.
DVD-RAM Support
Supported Read Write
LG GSA-4160B YES 5x 5x
Lite-On SOHW-1633s NO NO NO
NEC ND-3500A NO NO NO
Pioneer DVR-108 YES 2x NO
Now this is where both the LG GSA-4120B and GSA-4160B shine above the rest. In fact, it is what has made these drives the most popular DVD writers on the market. Unlike the rest in the roundup, it is a triple format burner, offering full support for DVD-RAM media. The other drives do not support it, with the exception of the Pioneer DVR-108 which supports reading of DVD-RAM discs at 2x. I personally don't see the point in offering only read capabilities, but it's at least one extra feature added to distinguish it from the rest. Fast 5x support of the LG GSA-4160 will actually be tested a bit later in this article.
CDR Writing
CDR CDRW
LG GSA-4160B 40x 24x
Lite-On SOHW-1633s 48x 24x
NEC ND-3500A 48x 24x
Pioneer DVR-108 32x 24x
The fastest CDR writers of the bunch are the Lite-On SOHW-1633s and the NEC ND-3500A. With their support for 48x writing, they make a great all-in-one drive for many users. The only drive lacking in this lineup is the Pioneer DVR-108. Why they opted for only 32x writing is still quite puzzling and is actually why I have found that many are choosing the NEC over the Pioneer. The LG GSA-4160B should not be left out of consideration though. We will show you later that the difference in write times between 40x and 48x is not much to brag about.
Bitsetting Support
One feature I've found that is most important for many users is bitsetting support. Let's compare these drives and see what they offer.
DVD+R/RW Support DVD+R DL Support
LG GSA-4160B NO NO
Lite-On SOHW-1633s YES NO
NEC ND-3500A NO YES
Pioneer DVR-108 NO YES
The LG GSA-4160B does not offer bitsetting support out of the box. However, it is very likely that you will be able to obtain support through an excellent third-party tool called DVDInfo Pro. Right now, they only support the GSA-4120B, but I'm confident with the author that support for this drive will be likely. LG firmware is very hard to hack, however some select few have been able to do so. Using Lite-On's booktype utility, you can change the booktype of DVD+R/RW media, however, the firmware does not automatically change booktype of DVD+R DL discs to DVD-ROM like the NEC and Pioneer models do.
Additional Features
As far as other features go, all these drives have a 2MB buffer but offer some sort of buffer under-run protection, which all work exceptionally well. This is especially useful if you will be burning discs at 16x, which I personally don't recommend just yet. As our individual tests of these drives revealed, burning at this speed is quite unstable, with the exception of the Lite-On SOHW-1633s.
CODE
http://www.extrememhz.com/dlcomp-p1.shtml
Since the introduction of double layer DVD writers, the interest has been quite overwhelming and is why we keep bringing you reviews of these highly popular drives. The anticipation has now turned into down right obsession and it has become a key component in any current or new system build, thanks to the declining prices and continued media hype. Manufacturers are quite aware of the fascination and is why they have each been releasing their own products which excel in at least one area of the testing methodology used in most reviews. This has led to some confusion as to which drive is best suited for the individuals needs. Today, we compare four 16x double layer drives and highlight both the strong and weak points in order to give you a better idea of which drive is best suited for you.
In this comparison guide, we will be looking at four of the top 16x drives to hit the market, the Pioneer DVR-108, NEC ND3500A, Lite-On SOHW-1633s and the new LG GSA-4160B. We will cover everything from design and features to performance and price. Let's begin with a quick look at each of these drives.
As far as the front bezel design goes, the LG-GSA4160B is by far the most attractive drive of the bunch. However, for those who are looking for a headphone jack, the Lite-On drive is the only DL writer offering a headphone jack, as well as volume control. The Pioneer and NEC drives, in my opinion, are the ugliest drives, with a very plain look that just wants to make you hide the drive period. Although we only obtained the 4160B in black, all these drives are offered with both white and black bezels. If you opt for the more expensive Pioneer "XL" model, it has the most impressive looks of any drive in the market. However, this will come at a very hefty price tag, considering they contain different firmware as well that offer a few extra features.
So, we have determined which is the sexiest-looking drive, but what about performance? I've done some extensive testing on each model to determine which is indeed the most impressive of the bunch. But before we show you performance results, let's briefly look at the features and what they have to offer.
Features
Each one of these drives has there disappointments when it comes to features. Let's compare each to see what they really offer.
DVD Writing
DVD+R DVD-R DVD+RW DVD-RW
LG GSA-4160B 16x 8x 4x 4x
Lite-On SOHW-1633s 16x 8x 4x 4x
NEC ND-3500A 16x 16x 4x 4x
Pioneer DVR-108 16x 16x 4x 4x
While all these drives are indeed 16x models, only two will write to both formats at this speed. The LG GSA-4160B and the Lite-On SOHW-1633s only support 8x DVD-R writing. So if you are one who only prefers this format, the NEC or Pioneer would be the best choice. All of these drives support writing to DVD re-writable media at 4x.
DVD+R9 Double Layer Writing
Write Speed
LG GSA-4160B 2.4x
Lite-On SOHW-1633s 2.4x
NEC ND-3500A 4x
Pioneer DVR-108 4x
The major disappointment with both the LG and the Lite-On 16x drives is the lack of 4x double layer writing support. Pioneer and NEC seem to be the only manufacturers to jump in and release second generation double layer drives supporting much faster 4x writing. In fact, the jump from 2.4x to 4x is quite substantial as we will show you a bit later in this comparison.
DVD-RAM Support
Supported Read Write
LG GSA-4160B YES 5x 5x
Lite-On SOHW-1633s NO NO NO
NEC ND-3500A NO NO NO
Pioneer DVR-108 YES 2x NO
Now this is where both the LG GSA-4120B and GSA-4160B shine above the rest. In fact, it is what has made these drives the most popular DVD writers on the market. Unlike the rest in the roundup, it is a triple format burner, offering full support for DVD-RAM media. The other drives do not support it, with the exception of the Pioneer DVR-108 which supports reading of DVD-RAM discs at 2x. I personally don't see the point in offering only read capabilities, but it's at least one extra feature added to distinguish it from the rest. Fast 5x support of the LG GSA-4160 will actually be tested a bit later in this article.
CDR Writing
CDR CDRW
LG GSA-4160B 40x 24x
Lite-On SOHW-1633s 48x 24x
NEC ND-3500A 48x 24x
Pioneer DVR-108 32x 24x
The fastest CDR writers of the bunch are the Lite-On SOHW-1633s and the NEC ND-3500A. With their support for 48x writing, they make a great all-in-one drive for many users. The only drive lacking in this lineup is the Pioneer DVR-108. Why they opted for only 32x writing is still quite puzzling and is actually why I have found that many are choosing the NEC over the Pioneer. The LG GSA-4160B should not be left out of consideration though. We will show you later that the difference in write times between 40x and 48x is not much to brag about.
Bitsetting Support
One feature I've found that is most important for many users is bitsetting support. Let's compare these drives and see what they offer.
DVD+R/RW Support DVD+R DL Support
LG GSA-4160B NO NO
Lite-On SOHW-1633s YES NO
NEC ND-3500A NO YES
Pioneer DVR-108 NO YES
The LG GSA-4160B does not offer bitsetting support out of the box. However, it is very likely that you will be able to obtain support through an excellent third-party tool called DVDInfo Pro. Right now, they only support the GSA-4120B, but I'm confident with the author that support for this drive will be likely. LG firmware is very hard to hack, however some select few have been able to do so. Using Lite-On's booktype utility, you can change the booktype of DVD+R/RW media, however, the firmware does not automatically change booktype of DVD+R DL discs to DVD-ROM like the NEC and Pioneer models do.
Additional Features
As far as other features go, all these drives have a 2MB buffer but offer some sort of buffer under-run protection, which all work exceptionally well. This is especially useful if you will be burning discs at 16x, which I personally don't recommend just yet. As our individual tests of these drives revealed, burning at this speed is quite unstable, with the exception of the Lite-On SOHW-1633s.
-[ How to rip Dynamic Flash Template ]-
How to Rip TM Dynamic Flash Templates
by: Baisan
What you need:
Sample dynamic flash template from TM website
Sothink SWF Decompiler
Macromedia Flash
Yourself
1. browse or search your favorite dynamic flash template in TM website. If you got one... click the "view" link and new window will open with dynamic flash.. loading...
2. If the movie fully loaded, click View -> Source in your browser to bring the source code of the current page and in the source code, search for "IFRAME" and you will see the iframe page. In this example were going to try the 7045 dynamic template. get the URL(ex.
http://images.templatemonster.com/screenshots/7000/7045.html) then paste it to your browser... easy eh? wait! dont be to excited... erase the .html and change it to swf then press enter then you'll see the flash movie again icon_smile.gif.
3. copy the URL and download that SWF file.. use your favorite download manager.. mine I used flashget icon_smile.gif NOTE: dont close the browser we may need that later on.
4. open your Sothink SWF decompiler... click "Quick Open" then browse where you download your SWF/movie file. Click Export FLA to export your SWF to FLA, in short, save it as FLA icon_smile.gif
5. Open your Macromedia FLash and open the saved FLA file. press Control+Enter or publish the file... then wallah! the output window will come up with "Error opening URL blah blah blah..." dont panic, that error will help you where to get the remaining files.
by: Baisan
What you need:
Sample dynamic flash template from TM website
Sothink SWF Decompiler
Macromedia Flash
Yourself
1. browse or search your favorite dynamic flash template in TM website. If you got one... click the "view" link and new window will open with dynamic flash.. loading...
2. If the movie fully loaded, click View -> Source in your browser to bring the source code of the current page and in the source code, search for "IFRAME" and you will see the iframe page. In this example were going to try the 7045 dynamic template. get the URL(ex.
http://images.templatemonster.com/screenshots/7000/7045.html) then paste it to your browser... easy eh? wait! dont be to excited... erase the .html and change it to swf then press enter then you'll see the flash movie again icon_smile.gif.
3. copy the URL and download that SWF file.. use your favorite download manager.. mine I used flashget icon_smile.gif NOTE: dont close the browser we may need that later on.
4. open your Sothink SWF decompiler... click "Quick Open" then browse where you download your SWF/movie file. Click Export FLA to export your SWF to FLA, in short, save it as FLA icon_smile.gif
5. Open your Macromedia FLash and open the saved FLA file. press Control+Enter or publish the file... then wallah! the output window will come up with "Error opening URL blah blah blah..." dont panic, that error will help you where to get the remaining files.
#DataVault, Irc Warez (Ty 4 Moving X)
Not Sure If Many People Use This Site, however heres A Few Steps To getting In.. And Getting The Latest Games..
Right 1st You Need mIRC (Download Below)
http://www.ircadmin.net/mirc/mirc614.exe
Once Downloaded And Installed.. Next Step Is To Get Yourself Connected To The Datavault Network..
Step 1 :- Open irc, Goto Tools,Options. Then Servers, Click Add
Under Description Type : DataVault
Under IRC Server Type : irc.addictz.net
Under Port(S) Type : 6667-6669
Now Click Ok..
Step 2 : Connecting To Irc.Addictz.Net
Goto Tools/Options/Servers
Select Datavault From Drop Down Menu
Tick "New Server Window"
Then Click Connect
A New Window Will Open Telling You That You Are Connecting To Irc.Addictz.net
Step 3 : Now You Have To Register YourSelf.
In The Window Type /msg nickserv register "your Password" "Your Valid Email"
Next Type /msg NickServ IDENTIFY "The Password You Just Entered"
It Should Now Say Your Registered!
Now Type /J #Datavault
Step 4 : The Bots In DataVault Spam What They Host Every 1 Hour, Becareful Not To Spam These Or Else You Will Be Banned..
Every Hour You Will See What Looks Like Below :-
** To request a file type: "/msg slut02 BITCH send #x
#1 392x [0.7G] Torque.DVDRiP.XviD-BRUTUS
#2 1509x [0.7G] The.Butterfly.Effect.DVDRip.XviD-DMT
It's Simple To Request A Download Now..
There Are Different Bots With Different Names, Ie Slut02 Is Just One Bot, There Are More Called Dv44, Dv33 Slut03 Etc.. However The Trigger Principle Is The Sa,e
Now If For Example You Wanted To Download "The ButterFly Effect", In The Main Chat Window You Would Type or Copy /msg slut02 BITCH send #2
Let Me Explaine.. /msg Is The Trigger, Slut02 Is The Bot BITCH and Send Are Both Triggers #2 Is The File Number You Want. Each Bot Can Host Numerouse Files, Ie #1 Being Another Film, #3 Also Being Another Film.
Once You Have Done That And Press Return, Just Sit Back And Wait.. Either The Download Will Start Straight Away, Or You Will Be Qued (*Cough Dodgy Spelling*)
Right Now To The Benifits Of #Datavault..
1: The Latest Release Of Most Films And Games.
2: 99.99% The Time You Get To Download At You Max BandWidth No Matter Your Connection (Either 56k (Omg Dont Download A 3 Gig File On That!!), Or A T1/OC3 Connection))
I Hope Someone Finds This HelpFull, If It's In The Wrong Place/ Or Inappropriate Then Plz Delete And Serve Me The Warning I Deserve....
Edit : It's A Good Idea To Have Auto Accept Dcc On, Incase Your Away When You Come InLine For Your Download, Generally Even If Your 20th In Que And It Says 3 Hours Wait, Your Prolly Looking At Around 30 Mins Waiting Slot..
Any Problems Please Let Me Know.. NN Peeps..
Right 1st You Need mIRC (Download Below)
http://www.ircadmin.net/mirc/mirc614.exe
Once Downloaded And Installed.. Next Step Is To Get Yourself Connected To The Datavault Network..
Step 1 :- Open irc, Goto Tools,Options. Then Servers, Click Add
Under Description Type : DataVault
Under IRC Server Type : irc.addictz.net
Under Port(S) Type : 6667-6669
Now Click Ok..
Step 2 : Connecting To Irc.Addictz.Net
Goto Tools/Options/Servers
Select Datavault From Drop Down Menu
Tick "New Server Window"
Then Click Connect
A New Window Will Open Telling You That You Are Connecting To Irc.Addictz.net
Step 3 : Now You Have To Register YourSelf.
In The Window Type /msg nickserv register "your Password" "Your Valid Email"
Next Type /msg NickServ IDENTIFY "The Password You Just Entered"
It Should Now Say Your Registered!
Now Type /J #Datavault
Step 4 : The Bots In DataVault Spam What They Host Every 1 Hour, Becareful Not To Spam These Or Else You Will Be Banned..
Every Hour You Will See What Looks Like Below :-
** To request a file type: "/msg slut02 BITCH send #x
#1 392x [0.7G] Torque.DVDRiP.XviD-BRUTUS
#2 1509x [0.7G] The.Butterfly.Effect.DVDRip.XviD-DMT
It's Simple To Request A Download Now..
There Are Different Bots With Different Names, Ie Slut02 Is Just One Bot, There Are More Called Dv44, Dv33 Slut03 Etc.. However The Trigger Principle Is The Sa,e
Now If For Example You Wanted To Download "The ButterFly Effect", In The Main Chat Window You Would Type or Copy /msg slut02 BITCH send #2
Let Me Explaine.. /msg Is The Trigger, Slut02 Is The Bot BITCH and Send Are Both Triggers #2 Is The File Number You Want. Each Bot Can Host Numerouse Files, Ie #1 Being Another Film, #3 Also Being Another Film.
Once You Have Done That And Press Return, Just Sit Back And Wait.. Either The Download Will Start Straight Away, Or You Will Be Qued (*Cough Dodgy Spelling*)
Right Now To The Benifits Of #Datavault..
1: The Latest Release Of Most Films And Games.
2: 99.99% The Time You Get To Download At You Max BandWidth No Matter Your Connection (Either 56k (Omg Dont Download A 3 Gig File On That!!), Or A T1/OC3 Connection))
I Hope Someone Finds This HelpFull, If It's In The Wrong Place/ Or Inappropriate Then Plz Delete And Serve Me The Warning I Deserve....
Edit : It's A Good Idea To Have Auto Accept Dcc On, Incase Your Away When You Come InLine For Your Download, Generally Even If Your 20th In Que And It Says 3 Hours Wait, Your Prolly Looking At Around 30 Mins Waiting Slot..
Any Problems Please Let Me Know.. NN Peeps..
Hide Files or Folders Using Command Prompt
Trick to hide files and folders using Command Prompt
The most important thing is that, once hidden with this method, the files/folders cannot be viewedby any search options even if you click "Show All Hidden Files and Folders".
Hiding the most wanted files and folders is very important nowadays and it's really a tedious job too. In order to make this tedious job an easy one, i'm goingto deliver you a the trick now.
For Example: You have a folder named " collegephotos " and this folder is stored in (Disk Drive E). You think that it should not be seen by strangers who use your PC.
For that you need to follow the following instructions
1. Press windowkey+R : Run command dialog box appears.
2. Now type " cmd " and hit enter. A command prompt window displays.
3. Now type " attrib +s +h E:\collegephotos " and hit enter.
4. The folder "collegephotos" will be hidden (Note: It cannot be viewed by any search options)
(To view this folder again, use the same command but replace '+' with '-' on both flags 's' and 'h'
The most important thing is that, once hidden with this method, the files/folders cannot be viewedby any search options even if you click "Show All Hidden Files and Folders".
Hiding the most wanted files and folders is very important nowadays and it's really a tedious job too. In order to make this tedious job an easy one, i'm goingto deliver you a the trick now.
For Example: You have a folder named " collegephotos " and this folder is stored in (Disk Drive E). You think that it should not be seen by strangers who use your PC.
For that you need to follow the following instructions
1. Press windowkey+R : Run command dialog box appears.
2. Now type " cmd " and hit enter. A command prompt window displays.
3. Now type " attrib +s +h E:\collegephotos " and hit enter.
4. The folder "collegephotos" will be hidden (Note: It cannot be viewed by any search options)
(To view this folder again, use the same command but replace '+' with '-' on both flags 's' and 'h'
WANT TO KNOW WHO USED YOUR PC IN YOURABSENCE
Want to know Who Used Your Pc In Your Absence & what Did He Do?
just follow these simple steps
start > run >eventvwr.msc
Events are stored in three log files: Application, Security, and System.
These logs can be reviewed and archived.
For our purposes we want the System log. Click on "System" in the left-hand column for a list of events.
Look for a date and time when you weren't home and your computer should have been off.
double click on the eg: info n it will show u the detail.
You can also use this log to see how long someone was on the computer.
Just look at the time the computer was turned on and off for that day
just follow these simple steps
start > run >eventvwr.msc
Events are stored in three log files: Application, Security, and System.
These logs can be reviewed and archived.
For our purposes we want the System log. Click on "System" in the left-hand column for a list of events.
Look for a date and time when you weren't home and your computer should have been off.
double click on the eg: info n it will show u the detail.
You can also use this log to see how long someone was on the computer.
Just look at the time the computer was turned on and off for that day
MATRIX LIKE EFFECT
Trick For Matrix Effect
just follow the steps
1. Open Notepad.
2.Copy the below mentioned text in your notepad file:
@echo off
color 02
:start
echo %random% %random%%random% %random%%random% %random%%random% %random%%random% %random%
goto start
3. Save the file with .bat extension like Mat.bat
it will look like image shown below
AND THEN JUST DOUBLE CLICK ON THIS Mat.bat file and see the magic
just follow the steps
1. Open Notepad.
2.Copy the below mentioned text in your notepad file:
@echo off
color 02
:start
echo %random% %random%%random% %random%%random% %random%%random% %random%%random% %random%
goto start
3. Save the file with .bat extension like Mat.bat
it will look like image shown below
AND THEN JUST DOUBLE CLICK ON THIS Mat.bat file and see the magic
Subscribe to:
Comments (Atom)